当前位置:

首 页 > 产品中心 >压线贴窗机 >>> 对角压线贴窗机  >>> 对线贴窗机

产品展示Products

对线贴窗机

对线贴窗机

型    号:
所属分类:对角压线贴窗机
报    价: 市场价:36000
分享到:

对线贴窗机由给纸部、印胶部、贴膜部、收纸部共四个部分组成中山市正茂机械设备有限公司是一家专业的贴窗机生产厂家,

对线贴窗机产品概述:

   对线贴窗机各部标准: 

   1.进纸部采用皮带进行底部带动进纸,可根据纸张大小手动调节。

   2.印胶部采用柔性模版印胶,模版形状可根据产品需要刻制。安装模版准确、方便、快捷;可不停机调整印胶的前后左右位置。

   3. 贴膜部采用无极调速装置,辊刀自动裁切膜,可不停机调整膜的长短前后左右位置,及压线切角。

   4. 定位部链勾推纸,左右靠板挡纸,纸张位置准确。电眼控制,有效处理纸张空张、连张。

   对线贴窗机详细说明
    用途:
    ,经过我公司研发人员不断努力,引进国外技术,采用进口材料和电脑元件,zui新研制,目前是中国较早制造单位。
    该机问世取代了高档内裤盒和其它礼品盒以前以人工切角、压线、对线、贴膜的困难。
    它以进纸、精度定位、上胶、薄膜长度裁切、两边切角、压线、特别是对线贴膜,全部采用自动化控制,具有人性化设计,达到你所需的要求。
    本机调试方便,对线精度高,适应性强,是各种高精度纸盒90度贴窗的理想设备。
    根据客户要求定制压双线或带烫金。
 
   主要技术参数
设备型号:          TC-650型贴窗机
1、纸张规格            500×600(mm)-200×200(mm)
2、适应纸张克数        200-450克/㎡ 卡纸
3、工作速度            3000-4500张/小时
4、电源电压            380v/50Hz (三相)
5、整机功率            6.5KW
6、整机重量            2000KG
7、外形尺寸            长×宽×高:5×1.1×1.2m

机器介绍

II. Introduction to machine

该设备由给纸部、印胶部、贴膜部、收纸部共四个部分组成

The equipment is composed of paper feeding section, gluing section, laminating section and paper receiving section.

1)给纸部

1) Paper feeding section

间断式皮带输送方式采用独立伺服控制系统,可根据纸张长短调整间断输送距离;抽纸皮带进行底部抽纸,去除传统离合控制方式。以此实现不停机连续加纸;多条输送皮带都装有齿轮和齿条装置,可快速调整皮带的左右位置。

Independent servo control system is adopted for intermittent belt conveying. Intermittent conveying distance can be adjusted as per paper size. Paper extracting belt extracts the paper at the bottom and gets rid of traditional clutch control mode to realize continuous paper adding without shutdown. Multiple conveyor belts are equipped with gears and rack units which can quickly adjust the left and right positions of the belt.

2)印胶部

2) Gluing section

采用双条高硬度不锈钢管辊传动胶水,管辊支坐采用滑块装置,可快速调节胶水厚薄,柔性模版印胶,模版形状可根据产品需要刻制。安装模版的辊刻有基线,安装模版准确、方便、快捷;印胶左右位置可随意调整,前后位置采用正位调整器调整,可不停机调整印胶的前后、左右位置。盛装胶水装置,在进行清洁保养时可拉出,清洁保养更加方便。

Double high-hardness stainless steel tube rollers transmit the glue. The tube rollers are equipped with a sliding block which can quickly regulate glue thickness. Flexible template gluing is adopted, and the template shape can be engraved according to product requirements. The roller for template installation is engraved with a base line, and the template installation is accurate, convenient and quick. Left and right positions for gluing can be adjusted freely. Front and back positions are adjusted with an adjustor which can adjust front, back, left and right positions for gluing without shutdown. When being cleaned and maintained, the glue device can be pulled out. It can be cleaned and maintained more conveniently.

3) 贴膜部

3) Laminating section

采用独立伺服控制系统,用户可根据产品尺寸,可不停机调整胶片的长短。同时自动切角压线;采用前规定位把纸张定位准确后,将胶片贴到纸盒上再通过自动横切刀把胶片切断;贴膜精度可达到±05mm

Independent servo control system is adopted. Users can adjust the film length as per product size without shutdown. Meanwhile, chamfer lines are cut automatically. After the paper is positioned accuray according to the above regulations, attach the films to paper box and cut the film via automatically transverse cutter. The precision of film attachment is up to ±0.5mm.

4)收纸部

4) Paper receiving section

进口柔软适中皮带输送可避免压伤产品,层迭式整齐收纸,确保完美质量。

Imported soft belt conveying can prevent product crushing. Paper is collected tidily in a sandwiching structure, which ensures perfect quality.

5)电器部

5) Appliance parts

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7